Jolifin LAVENI Dual UVA/LED rechargeable light curing device - Premium
for you 7 days a week.
30 day return policy
ENG
Jolifin LAVENI Dual UVA/LED rechargeable light curing device - Premium cures gels and polishes anytime and anywhere - independent of a power socket
Jolifin LAVENI Dual UVA/LED rechargeable light curing device - Premium cures all UV and LED gels and polishes with the latest 3D-Cure technology in independent battery operation. The large beam angle of the 3D LEDs ensures particularly even and gentle curing. The LEDs also consume less power and reduce heat build-up on the fingernail.
The device has diodes arranged on the side for optimum curing of the thumbs. This eliminates the need for a mirrored base plate and enables the use of hygiene inserts. There is no need to cure the thumbs separately.
Whether LED or regular UV gels, the 33 3D-Cure LEDs with different wavelengths ensure the best possible results. The 30-, 60- or 120-second timer can be set at the touch of a button on the convenient control panel. The elapsed time and battery status can be read on the display. The appliance switches on automatically by means of a light barrier when the hand is inserted. Depending on the setting, it switches off immediately after the set timer time has elapsed or when the hand is removed. It is as efficient as it is convenient. The ergonomically designed device is equipped with 33 high-performance LEDs, which are arranged to provide perfect illumination. The easily removable base plate is held in place by a practical magnetic holder. Thanks to the large opening, there is plenty of room for the whole hand inside. The function buttons are located on the top of the device, the on/off switch on the back. The light curing device is also perfect for pedicures.
Tip: For cleaning the appliance, we recommend using Surface Disinfection PLUS with spray head 1 litre or Wet Wipes Plus - surface disinfection wipes 80 pieces. Please make sure to leave out the LCD display.
Features:
- 33 perfectly positioned 3D-Cure LEDs with extra wide beam angle
- Service life of the LEDs: up to 50,000 hours
- Wavelength 365nm & 405nm (dual light)
- 30, 60, 120 second timer
- Low heat mode
- Large, convenient opening
- Removable base plate with practical magnetic holder
- Automatic start & stop via infrared sensor
- Extra-long supply cable: approx. 1.50m
- Colour: White
- Protection against insufficient curing when the battery is low
- Approx. 2 to 3 hours charging time
- Approx. 2 hours operating time
Technical data:
- Protection class: IP20
- 3200 mAh battery
- 24 watts, 13.5 volts, 2 amps
Dimensions:
- L approx. 20.0cm X W approx. 18cm x H approx. 9cm
| Application for: | Beginner, Domestic use, Foot care, Studio supplies |
|---|---|
| Battery product: | yes |
| Colour: | white |
| Curing: | LED, UVA |
| Feature: | 3D Cure technology, Battery, Hygienic base plate, Light barrier, Timer display |
| LED curing time: | 60 seconds |
| UV curing time: | 120 seconds |
| Variant: | Curing |
| Vegan: | Yes |
ENG
Application & tips:
- Connect the device to the mains adapter
- The LCD screen will light up and the battery symbol on the display will flash
- The device needs approx. 2 to 3 hours to fully charge the battery, the battery symbol on the display is shown as full
- To switch on, press the "On" button on the back of the appliance, the LCD display will light up
- Touch the timer button with the desired time (Low Heat mode always runs for 120 seconds)
- Place your hand in the lamp
- When the timer expires, the appliance stops the process automatically.
- If you do not select a time, the appliance automatically uses the 120 second timer
If you are not using the appliance, switch off the switch on the back to save battery power.
You can also use the appliance when the battery is connected to the mains adapter for charging.
If the device has not been used for approx. 3 months, the battery has discharged and must be recharged. The device should be switched off for this purpose.
ENG
Login
Tanja on 26. Februar 2024 um 13:11
Uv Geräte
Uv gerät ist nicht für unter Tisch geeignet da es sich nach 30min ohne Gebrauch abschaltet (Akku schonen eventuell) und der on/off Schalter an der Rückseite betätigt werden muss damit es wieder funktioniert! Im Alltag sehr nervig und störend und stand auch nicht in der Produkt Beschreibung aufgeführt! Es härtet gut und tut das was es soll aber das ständige An machen im Studioalltag ist störend, ich würde diese mir nicht nochmal holen.
ENG
Kann man defekte LEDs ersetzen?
Question from 23 Jan 2024Nein, LED´s sind nicht austauschbar.
Answer from 24 Jan 2024Wie lange hält eine Akku Ladung?
Question from 27 Apr 2024Eine Akku-Ladung hält für ca. 2 Stunden Betriebszeit.
Answer from 2 May 2024Ist das Gerät mit Netzteil zur Daueranwendung im Studio geeignet?
Question from 25 Jul 2024
